Avantree BTTC-418 - Use with your AV Receiver; Use with your PC;Laptop

Use with your TV
Check your TV output options before the set up
TVs with OPTICAL audio out
After pairing the Audikast to your Bluetooth headphones and connecting cables, you should be able
to hear sound from your headphones; if not,
Ensure your TV speaker is set to “External Speaker”.
Ensure TV audio format is set to “PCM” or “Dolby/DTS” is OFF(This is IMPORTANT)
Note: Setting menu may be dierent depending on dierent TV brands and model.
TV s with AUX 3.5mm audio out
After pairing the Audikast to your Bluetooth headphones and connecting cables, you should be able
to hear sound from your headphones; if not, ensure your TV speaker is set to “Headset”.
TVs with RCA audio out(Red/White ports labeled “AUDIO OUT”)
After pairing the Audikast to your Bluetooth headphones and connecting cables, you should be able
to hear sound from your headphones; if not,
Ensure use TV Red/White ports labeled “AUDIO OUT”, other Red/White ports are incorrect.
Ensure your TV speaker is set to “External Speaker”.
4
Speakers
Internal speakers
External speakers
Headset