Avantree Ensemble - Setting up Your TV (for Optical Connections Only)

User Manual
ENSEMBLE
12
EN
NOTE1: Some smart TVs automatically reset their settings after system
updates. Make sure your audio output / input format is set to “PCM” and
NOT “AUTO” or “DOLBY.”
NOTE2: When using Netix or Amazon Prime, you may need to start the
movie / show before changing the audio settings to “PCM.”
Setting Up Your TV (For optical connections only)
STEP 1
Using your TV’s remote control, press the SETTINGS button and navigate
to the AUDIO tab within the settings menu. (Please note that there may be
dierences in the setting names depending on your brand of TV).
STEP 2
Proceed to AUDIO OUTPUT and select “OPTICAL OUT / DIGITAL OUT”. Many
TVs will do this automatically; skip this step as needed.
STEP 3
Set Audio Output format to “PCM / STEREO” ON or “DOLBY” OFF.
If you’re having trouble nding these settings, you can scan the QR code
correlating to your TV’s brand OR visit
avantree.com/ensemble/tv-audio-settings for a more detailed guide.
If you connected to your TV via the optical OUT or “OPT OUT” port, you’ll
need to congure your TV settings before you’ll receive audio.
LG SONY SAMSUNG