Avantree Ensemble - Connecting the Headphones to Transmitter

User Manual
ENSEMBLE
11
EN
STEP 1
On your headphones, slide the switch to the ON position. The
LED indicator should start ashing blue.
STEP 2
The transmitter is ON by default. If not, slide its switch to the ON
position. The LED indicator should start ashing blue.
STEP 3
Keep the headphones close to the transmitter; they should connect within
3-5 seconds. Once connected, both the headphones’ and the transmitter’s
LED indicators will turn solid blue.
Connecting the Headphones to Transmitter
ONOFF
ONOFF
ON