Table 1: International power cord specifications
Country and plug
description
Specifications Typical plug
Continental Europe
•
CEE7 standard VII male
plug
• Harmonized cord (HAR
marking on the outside of
the cord jacket to comply
with the CENELEC
Harmonized Document
HD-21)
220 or 230 VAC
50 Hz
Single phase
U.S./Canada/Japan
•
NEMA5-15P male plug
• UL-recognized (UL
stamped on cord jacket)
• CSA-certified (CSA label
secured to the cord)
100 or 120 VAC
50-60 Hz
Single phase
United Kingdom
•
BS1363 male plug with
fuse
• Harmonized cord
240 VAC
50 Hz
Single phase
Australia
AS31
12-1981 male plug
240 VAC
50 Hz
Single phase
The Ethernet Routing Switch 3500 series does not have a power switch. When you connect
the AC power cord to a suitable AC power outlet, the switch powers up immediately
.
Connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet.
Installation preparation
16 February 2013
To Next Page
Loading...
