DJB; Reviewed:
SPOC 2/15/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
23 of 28
3600-Indyme.doc
5. Add the telephones that will communicate with the NetLink OAI Gateway. From the
second screen shown in Step 1, select Telephone Line Configuration and press Enter.
Indyme will provide the port numbers that are administered on the SOLIS MTS Server.
Use the down arrow key to proceed to the row for the appropriate line number. Use the
arrow keys to get to the MAC Address column. Enter the MAC Address of the 3600
series IP telephones. On the 3616, 3620 and 3626 telephones, this can be obtained by
pressing the FCN key, then using the down arrow key to access System Info and then
select Firmware Version. The MAC Address is displayed on Line 1.
Note: When entering the MAC Address, the “:” must be included.
Press the Tab button to set the value to Yes when asked “Are you sure?”
Repeat for all telephones that will receive text messages.
Telephone Line Configuration
Hostname: slnk-0642f6, IP Address: 192.168.1.111
Line MAC Address Name Extension
00: 00:90:7a:00:f4:14 NONE NONE
01: 00:90:7a:01:91:c8 NONE NONE
02: Not Configured NONE NONE
03: Not Configured NONE NONE
04: Not Configured NONE NONE
05: Not Configured NONE NONE
06: Not Configured NONE NONE
07: Not Configured NONE NONE
08: Not Configured NONE NONE
09: Not Configured NONE NONE
10: Not Configured NONE NONE
11: Not Configured NONE NONE
12: Not Configured NONE NONE
13: Not Configured NONE NONE
14: Not Configured NONE NONE
15: Not Configured NONE NONE
Are You Sure? Yes No
Y=Yes N=No Enter=Select Esc=Exit
Use Arrow Keys to Move Cursor
To Next Page
Loading...
