Avaya 3902 - Set on Hook Default Path

39
Options List
Set On hook default path
The On hook default path option (available on the 3903 and 3904)
automatically opens the voice path on either the Headset or on Handsfree when
you press a Line (DN) Key. After you select On hook default path from the
Options List menu;
From the On hook path menu, use the
Navigation Keys to highlight and
select either:
or
Handsfree selected
or
Headset selected
Press the Done Key to save selection. Press the Quit Key or Options Key to exit.
Amplified headsets are compatible with your Avaya 3900 Series Digital
Deskphone. The amplified headset is an option for noisy environments. An
amplified headset should be connected to the handset jack. The Headset Key is
not able to control a headset that is connected to the handset jack. In this
configuration, do not select Headset as the On hook default path.
For an amplified headset, adjust the volume using the Volume Control Bar on
your telephone before adjusting the volume on your headset amplifier. To
minimize distortion, the volume setting on the amplifier should be higher than the
volume setting on the telephone.
Unamplified headsets are compatible with the 3903 and 3904. An unamplified
headset should be plugged into the headset jack. With Headset selected as the On
hook default path, you can make calls or answer incoming calls by pressing a DN
Key.
For an unamplified headset, access Volume Adjustment in the Options List to
adjust the headset volume and sidetone (3904) that work best with the headset
you are using. You may also use the Volume Control Bar to adjust the headset
volume while you are on a call.
Refer to your distributor for the latest product bulletin from Avaya for
recommended headset types for the Avaya 3900 Series Digital Deskphones.
Handsfree selected
Headset selected