ffffffffffffffffffffffffffffffffffffff
Use of the Self-Test to Clear a Locked-up ADM
Self-test can also be used to reset the data options in the Active profile. Unlike the Data ZAP,
which resets the options to their factory default values, the self-test resets all the data options in
the Active profile to their power-up (P1) values and loads the power-up values for the profile
independent data options (speed, parity, and local mode) and the unstored data options (local.cr,
local.lf, and local.erase). Activation of the self-test will terminate any data call in progress. For
more information on self-test, refer to "Self-Test" section in Chapter 5, Testing.
7-2 Troubleshooting
To Next Page
Loading...
