ffffffffffffffffffffffffffffffffffffff
Using AT Local Mode Commands
The AT Local Mode provides an interface similar to that available on many popular modems. In
particular, the AT mode is appropriate when using a PC with communications software that uses
AT commands.
If you need to use AT Local Mode, you should have selected the "AT" option when you first set
the data options from your keypad. See Chapter 2 for information on setting the option.
Suspending and Continuing Data Transmission
To suspend data transmission and return to AT mode, rapidly type:
+++
(default value)
The response is
OK
Data transmission has been suspended and you can now type AT commands.
To exit AT mode and return to data mode:
Type
ato
The response is typically
CONNECT 9600
FIGURE 3-2
Changing Between AT Local Mode and Data Mode During a Data Call
3-8 Chapter 3
To Next Page
Loading...
