Avaya 6424D+M - Page 73

ffffffffffffffffffffffffffffffffffffff
Local Mode
AT, 2-3
CMD, 2-3
Enhanced AT, 2-3
Local mode
local-data, 2-2
local-idle, 2-2
Local Mode
Off, 2-3
Local.cr
data option, 4-8
Local-data, 2-2
Local.echo
data option, 4-8
Local.erase
data option, 4-8
Local-idle, 2-2
Local.lf
data option, 4-9
M
Making a data call, 2-2, 2-6
ISDN set, 2-6
PC, 2-6
terminal, 2-6
Match.speed
data option, 4-9
Memory dialing, 3-6, 3-7
Message
CONTINUE, 6-7
DENIED
DTR IS OFF, 6-7
DIAL, 6-7
INCOMING DATA CALL, 6-7
LINK DOWN, 6-7
Messages
7506 7507 display, 6-7
data terminal, 6-7
Minimum delay timer, 4-9
Min.timer
data option, 4-9
Mode
data option, 4-10
N
Named
memory dialing locations, 3-6
Numeric cause codes, A-1
Numeric formats, A-1
O
On-screen help, 3-2
Option profile
viewing, 4-19
Option profile settings
worksheet, 4-21
Option settings, 2-2
P
Packet Assembler Disassembler (PAD), 6-4
Packet switched data calls, A-1
Packet switched data service, 4-10
Parity, 2-3
data option, 4-11
PC communications package, 2-1
PC communications software, 1-2
Permanent connection, 1-3
Pin 2
transmitted data (BA), 6-1
Pin 20
data terminal ready (CD), 6-3
Pin 22
ring indicator (CE), 6-3
Pin 3
received data (BB), 6-1
Pin 4
request to send (CA), 6-2
Pin 5
clear to send (CB), 6-2
Pin 6
data set ready (CC), 6-2
Pin 7
signal Ground (AB), 6-2
Pin 8
received line signal detect (CF), 6-2
Profile
active profile, 4-15
factory profile, 4-15
stored profile, 4-15
Programming a data option profile, 4-16
Programming telephone numbers, 3-6
R
Receive flow control
data option, 4-12
Received data (BB), 6-1
Received line signal detect (CF), 6-2
Rec.flow
data option, 4-12
Remote loopback test, 5-2
Replacing one stored profile with another, 4-19
Request to send (CA), 6-2
Ring indicator (CE), 6-3
S
Self-test, 5-3
Setting critical options, 2-2
Setting data options
data terminal, 2-2
ISDN set keypad, 2-2
PC keyboard, 2-2
Setting options, 4-17
7506 and 7507, 2-3
display set, 2-3
with display, 2-3
without display, 2-4
Setting options on 7505, 2-4
Index I-3