Avaya ERS 45 Series - ERS 4000 Switch: UDP;TCP Port Range Using Meter to Remark Traffic

Avaya Inc. – External Distribution
33
avaya.com
September 2015
5.3.2 ERS 4000 switch: UDP/TCP Port Range using meter to
remark traffic
Assuming we wish to accomplish the following:
 Traffic with a destination UDP port range of 5000 to 5005, remark to Premium up to 10 Mbps,
then remark to Silver
 Traffic with a destination UDP port range of 5024 to 5044, remark to Platinum up to 5 Mbps, then
remark to Bronze
 Traffic with a destination TCP port range of 5060 to 5061, remark to Premium up to 10 Mbps,
then remark to Silver
 All other traffic, pass as-is
1
Traffic classifier configuration using name of one
qos traffic-profile classifier name one protocol 17 dst-port-min 5000 dst-port-max
5005 update-dscp 46 update-1p 6 block one eval-order 5 committed-rate 10000 committed-
burst-size 4 drop-out-action disable update-dscp-out-action 16
qos traffic-profile classifier name one protocol 17 dst-port-min 5024 dst-port-max
5044 update-dscp 34 update-1p 4 block one eval-order 6 committed-rate 5000 committed-
burst-size 4 drop-out-action disable update-dscp-out-action 10
qos traffic-profile classifier name one protocol 6 dst-port-min 5060 dst-port-max 5061
update-dscp 46 update-1p 6 eval-order 20 committed-rate 10000 committed-burst-size 4
drop-out-action disable update-dscp-out-action 16
2
Assign traffic classifier to ingress ports 1 to 11
qos traffic-profile set port 1-11 name one meter-mode classifier