Avaya ERS 45 Series - Default Settings: VSP 7000

Avaya Inc. – External Distribution
55
avaya.com
September 2015
7.4 Default Settings: VSP 7000
Default Settings
 The VSP 7000 supports 10 precedences used by QoS and non-QoS
o Precedence levels 1 to 7 are not used by default
o Precedence level 8 is used by DHCP Relay
 Can be cleared up if IP DHCP Relay is disabled – on by default
o Precedence levels 9 and 10 are permanently occupied
 Precedence level 9 is used by SPB
 Precedence level 10 is used by ARP
o Certain features if enabled can take up one or more precedence levels
 Please see Appendix for list of precedence levels used by various features
o Up to 128 filter components for precedences 1–4 and 256 filter components for
precedences 5–10
o Up to 128 meters per precedence per hardware device group, usable on a maximum of 8
out of the 10 available precedences
o Up to 64 counters for precedences 1–4 and 128 counters for precedences 5–10.
o Up to 32 TCP/UDP port range checkers
 Default Queue set is 2 with buffering set to large
Verification
1
Verify QoS queue set and buffer:
7024XLS#show qos agent
QoS Operational Mode: Enabled
QoS NVRam Commit Delay: 10 seconds
QoS Current Queue Set: 2
QoS Next Boot Queue Set: 2
QoS Current Buffering: Large
QoS Next Boot Buffering: Large
QoS Default Statistics Tracking: Aggregate
2
Verify QoS interface group and assignments
7024XLS#show qos if-group
Role Interface Capabilities Statistics Storage
Combination Class Tracking Type
____________________ ______________ ___________________ __________ ___________
allQoSPolicyIfcs Trusted Input 802, Input IP Aggregate ReadOnly
$qosDisabledIfcs Unrestricted Input 802, Input IP Disabled Other