Avaya ERS 5510 - 2 Qos Flow Chart; Figure 2: Qos Flow Chart

Filt
Filters and QOS Configuration for Ethernet Routing Switch 5500
Technical Configuration Guide
10
January 2013
avaya.com
2. QoS Flow Chart
The following flowchart displays the various steps required in setting up a QoS policy. You basically now
need to create a Classifier with each Classifier made up of one IP Classifier Element, or one L2 Classifier
Element or one IP and one L2 Classifier Element. You then add the Classifier to a separate Policy on a
per port basis. Or you can group a number of Classifiers into a Classifier Block and then add the
Classifier Block to a Policy on a per port basis. The Ethernet Routing Switch 5500 supports up to 114
Classifiers per port for a total of greater than 40K Classifiers in a fully configured stack.
Figure 2: QoS Flow Chart
Role Combination
*Application > QoS > Devices
> Interface Configuration
Role Combination –
Interface Classes
o Trusted Ports
o Untrusted Ports
o Unrestricted
Classification
*Application > QoS > Rules
Classifier Element
o IP Classifier Element
o L2 Classifier Element
Classifier
Made up of one of the
following:
o One L2 Element
o One IP Element
o One L2 and one IP
Element
Classifier Block
Grouping of one or more
Classifiers
Policy
Type = Classifier
*Application QoS Policy
Policy
Type = Classifier Block
*Application QoS Policy
or
Meter
*Application QoS Meter
* WEB Configuration Step