Avaya ERS 5510 - 11 Configuration Steps - Policy Configuration; Role Combination

Filt
Filters and QOS Configuration for Ethernet Routing Switch 5500
Technical Configuration Guide
40
January 2013
avaya.com
11. Configuration Steps – Policy Configuration
11.1 Role Combination
A role combination is formed by assigning one or more physical ports to the role and by designating the
interface class (Trusted, Untrusted, Un-restricted) for the role and associated ports. By default, when
using the WEB interface, all ports on the Ethernet Routing Switch 5500 are assigned to the default
interface group named „allBayStacklfcs‟ which has an interface class of untrusted. A port on the Ethernet
Routing Switch 5500 can only belong to one role combination.
When configuring a policy, an interface group will be assigned to the policy.
To add a new role combination, complete the following steps:
a) Add a new Interface Group:
ERS5500-48T(config)# qos if-group name <name> class <trusted|unrestricted|untrusted>
b) Assign the physical ports to the Interface Group:
ERS5500-48T(config)# qos if-assign port <port #> name <if-group name>
Example:
ERS5500-48T(config)# qos if-group name role_one class untrusted
ERS5500-48T(config)# qos if-assign port 1/5 name role_one
c) View Role Combination:
To view the Role Combination, enter the following command:
ERS5500-48T# show qos if-assign
Unit Port IfIndex Role Combination Queue Set
____ ____ _______ ________________ _________
1 1 1 allBayStackIfcs 8
1 2 2 allBayStackIfcs 8
1 3 3 allBayStackIfcs 8
1 4 4 allBayStackIfcs 8
1 5 5 role_one 8
ERS5500-48T# show qos if-group
Role Interface Capabilities Storage
Combination Class Type
________________________________ ____________ ___________________ ___________
allBayStackIfcs Untrusted Input 802, Input IP ReadOnly
role_one Untrusted Input 802, Input IP NonVolatile