Avaya ERS 5510 - Page 19

Filt
Filters and QOS Configuration for Ethernet Routing Switch 5500
Technical Configuration Guide
19
January 2013
avaya.com
4 CoS
7
1
Strict
100%
57344B
81920B
262912B
6
37
53
173
5
2
Weighted
Round Robin
65%
51200B
74240B
209920B
4
33
48
138
3
3
26%
38912B
61440B
176640B
2
25
40
116
1
4
9%
24576B
44544B
136960B
0
16
29
90
3 CoS
7
1
Strict
100%
65536B
109568B
393316B
6
43
72
259
5
2
Weighted
Round Robin
75%
57344B
87040B
262144B
4
37
57
172
3
2
3
25%
49152B
65536B
131072B
1
32
43
86
2 CoS
7
1
Strict
100%
106496B
180224B
524288B
6
5
70
118
345
4
3
2
Weighted
Round Robin
100%
61440B
81920B
262144B
2
1
40
53
172
1 CoS
7
1
Strict
100%
131072B
262144B
786432B
6
5
4
3
86
172
518
Egress CoS Queuing CLI Commands
5520-24T-PWR(config)# show qos queue-set-assignment
The show qos queue-set-assignment command displays in the CLI the 802.1p priority to egress
CoS and QoS queue mapping for CoS setting 1-8. This command is in the CLI priv-exec mode.
5520-24T-PWR(config)# show qos queue-set
The show qos queue-set command displays the queue set configuration. The display includes
the general discipline of the queue, the percent bandwidth (Kbps), and the queues size in bytes.
This command is in the CLI priv-exec mode.
5520-24T-PWR(config)# qos agent queue set <1-8>
The qos agent queue set <1-8> command sets the egress CoS and QoS queue mode (1-8) in
which the switch will operate. This parameter is global and requires a reset to activate a change.
This command is in the CLI priv-exec mode.
5520-24T-PWR(config)# qos queue-set-assignment queue-set <1-8> 1p <0-7> queue <1-8>