Filt
Filters and QOS Configuration for Ethernet Routing Switch 5500
Technical Configuration Guide
ERS5500 Step 1 – Create the classifier block
ERS5500-24T(config)# qos classifier-block 1 block-number 1 name b1 set-id 1 meter 1
ERS5500-24T(config)# qos classifier-block 2 block-number 1 name b1 set-id 2 meter 2
ERS5500-24T(config)# qos classifier-block 3 block-number 1 name b1 set-id 3 meter 3
12.2.1.6 Configure the Policy
The following command creates a policy with the classifier block created in step e above and also
enables statistics for each classifier element in the block.
ERS5500 Step 1 – Create the policy
ERS5500-24T(config)# qos policy 1 if-group q2 clfr-type block clfr-name b1 non-match-
action 2 precedence 3 track-statistics individual
12.2.2 Verify Operations
12.2.2.1 Verify the Role Combination
Step 1 – Verify that the if-group has been configured correctly
ERS5500-24T# show qos if-group
Role Interface Capabilities Storage
Combination Class Type
________________________________ ____________ ___________________ ___________
allQoSPolicyIfcs Untrusted Input 802, Input IP ReadOnly
unrestricted Unrestricted Input 802, Input IP NonVolatile
q2 Untrusted Input 802, Input IP NonVolatile
$remediationIfcs Unrestricted Input 802, Input IP Other
$NsnaIfcs Unrestricted Input 802, Input IP Other
Step 1 – Verify that the correct ports have been assigned to the if-group named “q2”
ERS5500-24T# show qos if-assign port 5-6
Unit Port IfIndex Role Combination Queue Set Capability
____ ____ _______ ________________ _________ __________
1 5 5 q2 2 Version 1
1 6 6 q2 2 Version 1
12.2.2.2 Verify IP-Element Configuration
Step 1 – Verify that the 3 IP Elements
ERS5500-24T# show qos ip-element
To Next Page
Loading...
