Filt
Filters and QOS Configuration for Ethernet Routing Switch 5500
Technical Configuration Guide
Min = 11111100000
Max = 11111111111
Max Port Range: 2016-2047
Other valid ranges:
2016 to 2016
2016 to 2017
2016 to 2019
2016 to 2023
2016 to 2031
12.4.1 Configuration – Using Policies
12.4.1.1 Configure the Interface Role Combination
For this example, we will configure a new role combination with port members 3 to 6. You have the choice
of assigning a policy directly at a port level or using an interface role.
By default, all ports are set for untrusted using the allBayStacklfcs Role Combination. In this example, we
will configure a new Role Combination as unrestricted and assign it to port 3 to 6.
ERS5500 Step 1 – Create the Interface Role Combination and name is “ifx”
ERS5500-24T(config)# qos if-group name ifx class unrestricted
ERS5500-24T(config)# qos if-assign port 3-6 name ifx
12.4.1.2 Add new IP element pertaining to the port ranges above
ERS5500: Step 1 – Create IP elements for TCP port range 80-127
5500(config)# qos ip-element 1 protocol 6 dst-port-min 80 dst-port-max 95
5500(config)# qos ip-element 2 protocol 6 dst-port-min 96 dst-port-max 127
ERS5500: Step 1 – Create IP elements for UDP port range 2000-2027
5500(config)# qos ip-element 3 protocol 17 dst-port-min 2000 dst-port-max 2015
5500(config)# qos ip-element 4 protocol 17 dst-port-min 2016 dst-port-max 2047
12.4.1.3 Configure Classifiers, one for each of the IP elements configured above
ERS5500 Step 1 – Create the an IP Classifier for each IP element created above
5500(config)# qos classifier 1 set-id 1 name c1 element-type ip element-id 1
5500(config)# qos classifier 2 set-id 2 name c2 element-type ip element-id 2
5500(config)# qos classifier 3 set-id 3 name c3 element-type ip element-id 3
5500(config)# qos classifier 4 set-id 4 name c4 element-type ip element-id 4
To Next Page
Loading...
