The ?PIP? button on the remote control selects between the following layouts:
Full screen of the far end image with near image PIP
Near and far end images side by side POP
Large far end image, small near image POP
Full screen of the far end image
The ?Layout? button swaps images around so for example it would toggle between
Large far end image, small near image POP
Large near end image, small far image POP
When H.329 dual images are either transmitted or received in single monitor display mode the
?PIP? button can select these combinations:
Full screen of the presentation image with far image PIP
Presentation and far end images side by side POP
Large presentation image, small far image POP
Full screen of the presentation image
Image not found
file:///var/privatewebfiles/privatefiles/public_images/various%20presentation%20images.JPG
In Dual monitor mode without Presentation material the monitors display:
Not in a Call In a Call
Main monitor Near Image + Menu Far Image + Menu
Second monitor Near image Near
When presentation material is transmitted or received the second monitor displays the
presentation material and the main monitor normally carries the menu information. The ?PIP?
button then selects the following layouts for the main monitor:
Full screen of the far end image with near image PIP
Near and far end images side by side POP
Large far end image, small near image POP
Full screen of the far end image
The ?Layout? button again swaps images around so for example it would toggle between
Large far end image, small near image POP
Large near end image, small far image POP
Some HD picture monitors have a tendency to crop images at the edges and lose information.
The main video output of the XT5000 CODEC contains the on-screen menus which are vital
to operate the CODEC, so to avoid problems an HDMI Over-scan control is provided within
To Next Page
Loading...
