Issue 2 June 2005 59
Chapter 7: Migrating a G350 LSP to a G700 LSP
(Communication Manager 2.1 or later)
This chapter provides a high-level list of tasks for migrating an S8300 LSP in a G350 gateway to
a G700 gateway. To complete these tasks, you need the following additional documents:
● Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media
Server, 555-234-100. To obtain this document, go to http://support.avaya.com
and
navigate to Installations, Migrations, Upgrades & Configurations; then select the
appropriate document
● Administrator Guide for Avaya Communication Manager, 03-300509.
In this scenario, an S8300B Media Server inserted in a G350 media gateway is moved to a
G700 media gateway. In both cases, the S8300B is configured as an LSP, and it is assumed to
running Communication Manager release 2.1 or later.
The tasks include:
1. Installing the G700 hardware.
2. Transferring the S8300B Media Server from the G350 to the G700.
3. Transferring media modules to the G700.
4. Removing the administration of the G350 and the LSP from the primary controller.
5. Reassigning endpoints to the new S8300/G700.
6. Updating the DHCP server alternate controller list.
7. Updating the gateway MGC list.
8. Configuring the G700 with the S8300B in LSP mode.
Follow the detailed procedures in Installation and Upgrades for Avaya G700 Media Gateway
and Avaya S8300 Media Server, 555-234-100, Issue 8, April 2005, for most of the tasks in this
migration scenario.
To Next Page
Loading...
