Avaya S8700 - Page 15

Overview
Reliability
Overview for S8700 Media Server 15
November 2003
Figure 5: Duplex-reliability configuration when sending voice bearer over IP
Figure notes
Number Description of Connection
1 & 2 S8700 Media Server pair. One in a active mode and the other on standby.
3 Duplication Links: The Ethernet connection default Ethernet 2 and the fiber link
4 A dedicated Ethernet connection to a laptop. This connection is active only during on-site
administration or maintenance and the services interface can link to the standby server through a
telnet session.
5 Connection from the servers to the Ethernet switch.
6 Ethernet Switch – A device that provides port multiplication on a LAN by creating more than one
network segment. In an IP-Connect environment, the Ethernet switch should support 802.1 ip/Q,
VLAN and 10-/100-Mbps.
7 Two UPS units
8 Port Network – An optional configuration of Media Gateways that provides increased port
capacity.
9 IPSI – A circuit pack that transports control messages over IP. This IPSI circuit pack is used so the
S8700 Media Server can communicate with the PNs.
10 Customer LAN
11 Control Lan Interface (C-LAN) - A circuit pack that provides call control for every IP endpoint
that is connected to the media server using an Avaya media gateway.
112
13 24
CONSOLE
1
1
12
2
100bT
LINK
TRMT
RCV
BBI
LINK
TRMT
RCV
100bT
LINK
TRMT
RCV
BBI
LINK
TRMT
RCV
100bT
LINK
TRMT
RCV
BBI
LINK
TRMT
RCV
cydsdup KLC 091403
1 2
3
4 4
5
6
7 7
PN 1
8 8
PN 2
8
PN
10
IPSI
9
9
IPSI
11 11 11
IPSI
9