EasyManua.ls Logo

Avaya VSP 4450GSX-PWR+ - Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000; Front Panel Leds

Avaya VSP 4450GSX-PWR+
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stopping syslogd/klogd: no syslogd found; none killed
Sending all processes the TERM signal...
Sending all processes the KILL signal...
hwclock: can't open '/dev/misc/rtc': No such file or directory
/etc/rc0.d/S25save-rtc.sh: line 5: /etc/timestamp: Read-only file system
Unmounting remote filesystems...
Stopping portmap daemon: portmap.
Deactivating swap...
Unmounting local filesystems...
[695413.959234] Power down.
[695413.989531] System Halted, OK to turn off power
Check Light Emitting Diode (LED) on the Avaya Virtual
Services Platform 4000
The figures and tables in the following sections describe the LEDs on the Avaya Virtual Services
Platform 4000 switches. The tables describe LED operation for a switch that finishes the power-on
self-test.
Front panel LEDs
The following diagram illustrates the components on the front panels of the Avaya VSP 4000
4450GSX-PWR+ switch.
For detailed explanations of the states indicated by each front panel LED type, see the following
sections:
Port LED state indicators on page 36
Switch LED state indicators on page 35
Figure 7: VSP 4450GSX-PWR+
Installing the Avaya VSP 4000 4450GSX series
November 2016 Installing Avaya Virtual Services Platform 4450GSX-PWR+ Switch 34
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya VSP 4450GSX-PWR+

Related product manuals