13
Step 9: Inflate tires.
Check that the tire beads and tires are evenly seated on the rims. Use a pump with a Schrader valve and
pressure gauge to inflate each tire to the recommended pressure indicated on the tire, min of 5 PSI , max
of 30 PSI. Do not overinflated or underinflate tires.
Step 10: Install saddle.
Open seatpost clamp lever, adjust the seatpost to a comfortable height, while ensuring the seatpost is
inserted past the minimum insertion point, as indicated on the seat post. Close the seatpost clamp lever.
Protector
To Next Page
Loading...
