aventon PACE 350 - Service Intervals and Safety Checks; Pre-Ride Safety Checklist

Notice: Before every ride, and after every 25-45 miles (40-72 km), we advise following the pre-ride
safety checklist.
Pre-Ride Safety Checklist
Interval
Inspect
Service
Replace
Weekly,
160-321
km (100-
200 mi)
- Check hardware for proper torque.
- Check drivetrain for proper alignment and
function (including the chain, freewheel, chainrin
g,
and derailleur).
- Check wheel trueness and for quiet wheel
operation (without spoke noise).
- Check condition of frame for any damage.
- Clean frame by wiping frame
down with damp cloth.
- Use barrel adjuster(s) to tension
derailleur/brake cables if needed.
- Replace any components
conrmed by Aventon Bikes
Product Support or a certied,
reputable bike mechanic to be
damaged beyond repair or
broken.
Monthly,
402-1207
km (250-
750 mi)
- Check brake pad alignment, brake cable tension.
- Check bike is shifting properly, proper derailleur
cable tension.
- Check chain stretch.
- Check brake and shifter cables for corrosion or
fraying.
- Check spoke tension.
- Check accessory mounting (rack mounting bolts,
fender hardware, and alignment).
- Clean and lubricate drivetrain.
- Check crankset and pedal torque.
- Clean brake and shift cables.
- True and tension wheels if any
loose spokes are discovered.
- Replace brake and shift
cables if necessary.
- Replace brake pads if
necessary.
Every 6
Months,
1207-2011
km (750-
1250 mi)
- Inspect drivetrain (chain, chainring, freewheel,
and derailleur).
- Inspect all cables and housings.
- Standard tune-up by certied,
reputable bike mechanic is
recommended.
- Grease bottom bracket.
- Replace brake pads.
- Replace tires if necessary.
- Replace cables and housings
if necessary.
22