05/04 Rev. 1.2-03 USER MANUAL Setup & Operation
AP4.4 – AP5.4
22
Inserting a
CF card
1. Switch off the printer. Wait for 5 seconds.
2. Insert the CompactFlash card completely into the card insert. The wide
guide notch should face upwards (see Fig. 17).
¯ Insert the CF card into the designated slot until the release button (1) is
pushed outwards. The insert card will sit flush with the back casing.
Fig. 17: Inserting a CF card. If the CF card has been inserted correctly, then it will sit flush
with the printer’s back casing (right).
¯ For more detailed information on how to use CF cards, please refer to the
Plugin Card Manual, topic section Application
, section “CompactFlash Card”.
Setting the Realtime Clock
(AP5.4 only)
The AP5.4 realtime clock can be used to calculate and to print the expiration
date of any perishable goods.
Read here how to set the realtime clock:
1. Call parameter SYSTEM PARAMETERS > Realtime clock
2. Type in date and time: pressing the cut button shifts the cursor, pressing the
feed button changes the setting and by pressing the online button, the set-
ting is acknowledged.
P How to set parameters: read topic section „Info Printouts and Parameters“.
Reading out real time with Easy-Plug
Reading out real time is done by using one of the following Easy-Plug com-
mands:
• #YC realtime as text
• #YS realtime as bar code
• #DM downloading month names
P Detailed Information provides the Easy-Plug manual.
Realtime clock
dd.mm.yyyy hh:mm
dd=day, mm=month, yyyy=year, hh=hour,
mm=minute
To Next Page
Loading...
