Avery Dennison AP3.4 - Installing the Label Layout Program; Xbar; Nicelabel

11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation
AP3.4
11
Installing the label layout program
Xbar
¯ Is required for the standalone operation of the printer with a keyboard (option)
connected.
1. Insert the CD „Printer Documentation“ (is delivered witih the printer).
2. Go to folder „\Utilities\AP34\Xbar Labelprogram“and start the „*.exe“- file
which is stored there.
3. Follow the instructions of the installation wizard.
NiceLabel
1. Insert the CD „Printer Documentation“ (is delivered witih the printer).
The CD starts automatically.
The window „Printer Documentation“ opens.
2. Click „Printer drivers and label software“.
The selection window „NiceLabel SE CD“ opens.
3. Click „Installl“ and then „NiceLabel“.
The installation wizard welcomes you.
4. Follow the instructions of the installation wizard.