11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation
AP3.4
6
Basic Operations
Printing a Configuration Report
1. Turn off the printer. Press and hold the FEED button.
2. Turn on the power.
3. READY indicator blinks, release FEED button.
4. The printer will perform a self test and print out a configuration report [3].
5. READY indicator stops blinking and lights up.
6. The following information will be printed on this report.
¯ After self test the printer will enter character dump mode. For normal opera-
tion press the CANCEL button to stop dump mode.
[3] Configuration report.
To Next Page
Loading...
