05/09 Rev. 5.02-01 USER MANUAL Setup & Operation
AP4.4 – AP5.4
17
¯ To stop printing, press the online button.
Message Mode The printer uses the message mode to signal an error or a particular operating
status. Message mode indicates that the printer is waiting to quit or for a fault
to be corrected. When exiting, the printer switches from message mode to of-
fline mode (depending on the error and the progress of the previous process).
Messages are made up of the status number and a brief descriptive text:
The messages 5001 (see above) e.g. occurs, if the printer is set for using la-
belling material with perforation, but continuous form material without perfora-
tion is inserted. In this example, the printer will continue to feed the material
for a few seconds before it finally sends an error message.
More information on message reports and a detailed list of all messages can
be found in topic section Status Messages .
Standalone Mode (For AP5.4 only)
In standalone mode, the print jobs are not transmitted via a data cable, but are
stored on a CF-Card. From there, they can be selected using the printer dis-
play or an keyboard connected to the printer.
For detailed information about using the standalone mode, refer to topic
section Advanced Applications .
Status 5001
No punch detected
To Next Page
Loading...
