CONFIGURING THE SCANNER
7
Use scanner configuration to
set the scanner operating mode, trigger mode, and scanner timeout
select the .wav file for successful and unsuccessful scans
enable and disable each specific bar code.
Setting Scanner Options
1. Touch the Home key and then select Scanner Config.
Note: Touch Restore to Defaults to return all the scanner settings to the default values. The
printer automatically resets any invalid settings or ranges to the default setting.
2. Touch Test Settings to go to the Scanner Diagnostics window.
3.
Scan a bar code. The type of bar code and length of data appears. Touch OK to return to
the Scanner Configuration window.
Configuring the Scanner 7-1
To Next Page
Loading...
