User Manual
TTX 450/650/950/1050 – Puma/Lion/Tiger/Tiger XXL – TDI/STDI/XXtreme –
S45/65/95/105
05/08 Rev. 2.14 5
Initiation
Unpacking of Printer
• Remove top foamed packing.
• For removing the printer off the box, take it at the base plate only and lift.
A second person should assist by removing the cardboard box downwards.
Note: Front cover, motor of optional knife must not be used as carrying
handles.
• Set unit to a plain and stabile desk.
• -TDI / EXXTREME / S TDI only-
• Mount paper tray in and out, bow and length position stick according to picture
below
• Carry unit only by taking it at the base plate
Note: Front cover, motor of optional knife must not be used as carrying
handles.
To Next Page
Loading...
