9
lever overhaul
9
Use the pliers to apply downward pressure to the lever body and
remove the snap ring.
Remove the piston/bladder assembly.
CAUTION - EYE HAZARD
Do not look directly into the lever body while performing this step.
The internal piston/spring assembly is preloaded and will come out
of the lever body quickly, which can result in injury. Wear safety
glasses.
10
Lubricate a new piston/bladder/snap ring assembly by dipping it
into Avid High-Performance 5.1 DOT Fluid.
You can also use Avid DOT Grease, or DOT 5.1 or 4 compatible
grease, as a lubricant.
To Next Page
Loading...
