What to do if Avidyne Avionics Display radar sensor is not communicating?
If the radar sensor is not communicating, first verify that the radar sensor is turned on and valid. Next, verify that the EX5000 is properly seated in its tray. Finally, verify the system wiring.
What to do if Avidyne Avionics Display GPS data is invalid and radar is ON?
If the GPS data is invalid and the radar is ON, verify the GPS/FMS is ON and valid. Also, verify system wiring.
How to fix invalid radar sensor data on Avidyne Entegra EX5000?
Cycle power on the EX5000.
Lists features like traffic, lightning, engine data, and datalink receivers.
Provides detailed specs like display size, resolution, weight, and electrical requirements.
Explains the need to configure the EX5000 for sensor types and port configurations.
Provides instructions and considerations for physically mounting the MFD in the aircraft.
Details power requirements and the main D-sub connector for electrical interfaces.
Offers specific guidance on wiring power, dimming, ARINC, and RS-232 connections.
Guides on connecting various external sensors and systems to the MFD.
Details accessing and navigating the MFD Maintenance Mode for setup.
Guides on configuring GPS/FMS systems for interface with the MFD.
Details setting up Avidyne TWX-670 and L-3 WX-500 lightning sensors.
Guides on setting up supported traffic sensors like TAS, TIS-G, and TCAD.
Covers interfacing with ADS-B receivers for weather and traffic data.
Guides on setting up Honeywell EGPWS systems for TAWS functionality.
Covers setup and calibration for the Bendix/King RDR-2000 radar system.
Guides on setting up engine instrument display for supported aircraft.
Covers configuring aircraft-specific options like auxiliary data and dimming bus.
Guides on configuring map heading sources and orientation.
Describes using System Info pages to verify settings and functionality.
Guides on verifying compatibility of installed electronic systems with the MFD.
Explains how to perform a strike test for the TWX670 lightning sensor.
Provides instructions and materials for cleaning the EX5000 screen safely.
Explains types of data (NavData, CMax, EMax) that can be uploaded/downloaded.
Guides on uploading the navigation database to the EX5000.
Lists ways to contact Avidyne for technical assistance via web, email, fax, or phone.
General| Display Type | LCD |
|---|---|
| Screen Size | 10.4 inches |
| Interface | ARINC 429, RS-232 |
| Power Requirements | 28 VDC |
| Input Voltage | 28 VDC |
| Certification | TSO-C113 |
To Next Page