What to do if Avidyne Monitor radar sensor is not communicating?
If the Avidyne Monitor radar sensor is not communicating, ensure that the radar sensor is turned on and functioning correctly. Also, check that the EX500/EX600 is properly seated in its tray and verify the system wiring.
What to do if Avidyne EX500 shows invalid GPS data when radar is ON?
If the Avidyne Monitor displays invalid GPS data while the radar is on, first verify that the GPS/FMS is on and providing valid data. Next, check the system wiring.
What to do if Avidyne EX500 Monitor radar sensor data is invalid?
If the radar sensor data on your Avidyne Monitor is invalid, try cycling the power on the EX500/EX600.
General| Display Type | LCD |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Screen Size | 5.5 in diagonal |
| Input Voltage | 14V or 28V DC |
Steps to power on and initialize the EX500/EX600 display.
Explains the differences in knob controls between 2-knob and 4-knob EX500/EX600 versions.
Details on how to operate the various controls and functions available on the Map page.
Information on how the system indicates loss of GPS or heading input on the Map page.
How traffic advisories are displayed and managed on the EX500/EX600.
Description of the dedicated Traffic page and its displayed information when a traffic alert occurs.
How to display radar data as an overlay on the Map page.
Features and controls of the dedicated Radar page for detailed radar display.
Safety precautions and exposure level information related to aircraft weather radar operation.
General overview of the Terrain Awareness and Warning System (TAWS) display and its functions.
How to interpret and respond to TAWS cautions and warnings for terrain and obstacles.
Details on flight plan waypoints, ground speed, time, and datalink status displayed on the Trip page.
Functionality of the Nearest page for displaying nearby airports and navaids.
Information on the Broadcast Datalink receiver options and weather data services.
Details on the 2-Way Datalink transceiver, flight tracking, and using it in flight.
Explains the types of weather data available via Datalink, including radar, Sat IR, and text/graphical METARs.
Configuration steps for enabling and using Iridium 2-Way Datalink services.
Configuration steps for setting up Datalink options for ORBCOMM.
How to send and receive text messages using the Iridium system via the MLX770.
Procedures for updating NavData and CMax chart databases for the EX500/EX600.
To Next Page
