EasyManua.ls Logo

Avidyne EX500 - TIS Sensor Status

Avidyne EX500
184 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Traffic Mode and the Traffic Page (Optional)
Avidyne EX500/EX600 MFD -32- 600-00078-001 Rev 05
intruder to your position, in hundreds of feet. An arrow next to an
intruder symbol shows the direction of any vertical movement of the
intruder that is in excess of 400 feet per minute.
3.4 TIS Sensor Status
The following may be reported in the Traffic status block on the Map
page:
OPER - The TIS sensor is operating normally.
CST 00:00 - The TIS sensor has temporarily lost the information
feed from ground-based radar and is in “coast” mode. The MFD
will continue to display the traffic last received, while the CST
timer will count the seconds since the last valid data.
RMV 00:00 - After 12 seconds of coasting, the TIS sensor will
remove the traffic display and display RMV, and continue to count
the time since the last valid data.
UNAVAIL - More than 60 seconds have passed since valid data
was received, or TIS data is not available at the current aircraft
location.
SBY - The TIS sensor is in standby mode.
DATA FAIL - The TIS sensor has reported an internal fault.
Traffic information is removed from display.

Table of Contents

Other manuals for Avidyne EX500

Related product manuals