Avidyne EX500 - Features Available in Other Parts of the World; Features Specific to International Flight

Using EX500/EX600 Outside the US
Avidyne EX500/EX600 MFD -166- 600-00078-001 Rev 05
12.3 Features Available in Other Parts of the
World
● Iridium—Iridium service is available worldwide, however, not all
weather data is available worldwide. At the time of this printing,
MLX770 supports worldwide METARs, TAFs, Sat IR and
Lightning, along with North American, European, and Australian
Radar, and selected products in other regions of the world. See
http://www.avidyne.com/products/mlx/coverage/ for the latest
coverage information for all Iridium Datalink products.
12.4 Features Specific to International Flight
● CMax Chart Data—Terminal procedure chart availability is
determined by your CMax chart subscription coverage. For
questions regarding your coverage area, contact Jeppesen at
www.jeppesen.com, or by phone (for western hemisphere,
including South America, call +1-303-799-9090, for eastern
hemisphere, including Europe, call +49 6102 5070).
● Terrain Data—Avidyne provides terrain data for two areas: the
Americas (North and South America), and International
(excluding Americas). If you are flying in an area where your
current terrain data is not supported, terrain will not display
(similar to the Base view on the Map page).
An International Conversion Utility is available from Avidyne that
changes the MFD terrain data between Americas and
International. The utility can be installed in the field at an
Authorized Avidyne distributor. For information about the
International Conversion Utility, please contact Avidyne Sales at
800-284-3963.