Avigilon 1.3C-H4SL-D - Installation; Required Tools and Materials; Camera Package Contents; Installation Steps

Installation
Required Tools and Materials
The following tools are required to complete the camera installation but are not included in the camera
package:
l No. 2 Phillips screwdriver — for attaching camera to an electrical box or mounting surface.
l T20 Pin-In Torx® driver
Camera Package Contents
Ensure the package contains the following:
l Avigilon H4 SL Dome Camera (Indoor model — H4SL-D)
o
Mounting template sticker
o
4 screws and anchors for solid walls
o
Surface mount adapter
o
Side conduit cover
l Avigilon H4 SL Dome Camera (Outdoor model — H4SL-DO)
o
Mounting template sticker
o
RJ-45 grommet piercing cap
o
4 screws and anchors for solid walls
o
Surface mount adapter
o
Side conduit cover
o
Side conduit plate (2 sizes)
o
Conduit grommet
o
Cable entry grommet
Installation Steps
Complete the following steps to install the camera:
Removing the Dome Cover 7
Inserting Cables through the Sealing Grommet 7
Using the Surface Mount Adapter 8
Installing the Camera Base to the Mounting Adapter 12
(Optional) Using the USB Wi-Fi Adapter 13
Assigning an IP Address 14
Installation 6