Avigilon 1.3C-H4SL-D - Removing the Dome Cover; Inserting Cables through the Sealing Grommet

Accessing the Live VideoStream 14
Aiming the Dome Camera 14
(Optional) Configuring microSD Card Storage 16
Installing the Dome Cover 17
Zooming and Focusing the DomeCamera 17
Configuring the Camera 17
Removing the Dome Cover
NOTE: Be careful not to scratch or touch the dome bubble. The resulting marks or fingerprints may affect the
overall image quality. Keep the protective covers on the outside of the dome bubble until the installation is
complete.
l Remove the dome cover by releasing the elastic strap holding the dome cover to the camera base.
Inserting Cables through the Sealing Grommet
Always use the provided sealing grommet to prevent dust and debris from entering the camera.
1. Remove the sealing grommet from the camera base.
2. Push the Ethernet cable through the grommet.
If you are installing the indoor model (H4SL-D), you should be able to simply push the cable, crimped or
uncrimped, through the grommet by hand.
If you are installing the outdoor model (H4SL-DO), use one of the following methods:
Removing the Dome Cover 7