In-Ceiling Mount Installation
Camera Package Contents
The H4 Multisensor camera has a variety of different mounting, dome cover, camera and accessory options. The
components for each H4 Multisensor camera will arrive in a camera package, a dome cover package, a
mounting adapter package, a mount package (for pendant mount cameras), and an optional IR Ring package.
Ensure the camera package contains the following:
l Avigilon H4 Multisensor Camera module. A 3- or 4-sensor camera module with 3 MP, 5 MP, or 4K (8 MP)
resolution per sensor.
l Audio, external power, and I/O pigtail cable connector
l RJ45 CAT5E plugs (x2)
l RJ45 connector waterproof gland
Ensure the In-Ceiling mount adapter package contains the following:
l In-ceiling mount adapter (H4AMH-AD-CEIL1)
l Cable entry cover
l Installation instructions sheet
l Mounting template sticker
Ensure the dome cover package contains the following:
l Clear or smoked dome bubble and cover (H4AMH-DC-COVR1 or H4AMH-DC-COVR1-SMOKE)
If you are installing the in-ceiling camera with the metal ceiling panel, ensure the package includes the following:
l Metal ceiling panel (H4AMH-DC-CPNL1)
Installation Steps
Complete the following sections to install the device.
Preparing the Camera for In-Ceiling Installation
Before starting the installation, prepare the in-ceiling adapter for installation:
In-Ceiling Mount Installation 46
To Next Page
Loading...
