Setting Description
much detail as it can of the scene.
l Color — select this option if the camera can only stream video in color.
l Black and White — select this option if the camera can only stream
video in black and white.
l Thermal — select this option if the camera can stream forward looking
infrared (FLIR) video.
Analytics Scene Mode:
Select the location that best describes where the camera is installed.
l Outdoor — suitable for most outdoor environments. This setting
optimizes the camera to identify vehicles and people.
l Large Indoor Area — only detects people and is optimized to detect
people around obstructions, like chairs and desks, if the head and torso
are visible.
l Indoor Overhead* — optimized for cameras mounted directly overhead
and should only be used when a torso cannot be seen in the camera
field of view. Any movement is assumed to be human. Use in areas with
limited space but with high ceilings, or to monitor doors. Do not use with
the Avigilon Appearance Search feature, Face Recognition, the Self-
Learning feature, or to detect people traveling against the crowd.
l Outdoor High Sensitivity* — optimized to run with higher sensitivity for
detecting people and vehicles in challenging outdoor scenes. This
option may generate more false positives. Only use this option if you
require the system to be more sensitive than the Outdoor setting.
l Long Range Night* — prioritizes outdoor long-range object detection
at night over object classification and tracking during the day. Uses
external IR illumination rather than built-in IRillumination from the
camera. Object classification and tracking accuracy during the day is
reduced compared to other outdoor modes. Available for H4Acameras
only.
* These modes are not available for H5A cameras.
Enable Noise Filter
Select the checkbox if the camera is too sensitive and falsely detects motion
as classified objects.
Display Classified
Objects
Select the checkbox to display bounding boxes around classified objects in
recorded video.
Enable Tampering
Detection
Select the checkbox to enable tampering detection. If cleared, the device will
no longer send tampering events.
Sensitivity:
Enter a value between 1-10 to select how sensitive a camera is to tampering
events.
Tampering is a sudden change in the camera field of view, usually caused by
someone unexpectedly moving the camera. Lower the setting if small changes
Analytic Settings 19
To Next Page
Loading...
