5. Add the following details in Edit Group:
a. Enter a group name.
b.
Select a rank from Rank:. To edit or view the entire Corporate Hierarchy, click .
c. Move the Min Password Strength: slider to define how strong each user's password must be.
d. To enable Two-Factor Authentication, select the Required checkbox.
Users will need an authenticator app on their mobile device to scan a QRcode before they
can log into a site.
Ensure your servers sync to a real-time source. If the time on the user's device does not match,
they will not be able to log in. Verification codes are only valid within 5 minutes.
Note: The default administrator will be able to log in to a site without Two-Factor
Authentication, even if it is enabled for their group.
Important: Users with Two-Factor Authentication enabled will not be able to use the
ACC Mobile 3 app or the ACC Virtual Matrix software.
e. To enable Emergency Privilege Override, select the Enabled checkbox. For more information,
see Emergency Privilege Override below.
6. Click Enable Dual Authorization to configure Dual Authorization settings. When enabled, users
cannot review recorded video without permission from the authorizing group.
a. Click the toggle to enable Dual Authorization. Click again to disable Dual Authorization.
b. Select which groups can authorize users.
c. Click OK.
7. In the Members tab, add users to the group.
If a user is added to the group through Add/Edit User, the user is automatically added to the group's
Members list.
a. Click Add User.
b. Select the users from this site to include in this group or use Search… to refine results.
c. Click Add. The users are added to the Members list.
8. Click OK to save the new group.
Emergency Privilege Override
Emergency Privilege Override is a group permission that gives operators access to the following privileges
without needing dual authorization:
l View high-resolution images
l View live images
l Use PTZ controls
l Broadcast to speakers
Emergency Privilege Override 34
To Next Page
Loading...
Need help?
General
