To Next PageTo Next Page
Need help?Do you have a question about the AVIRE Memco Memcom+ and is the answer not in the manual?
Installation procedure for the Top Of Car version of the Memcom unit.
Installation procedure for the Car Operating Panel version of the Memcom unit.
Guide for essential programming setup of the Memcom unit.
Procedures for testing and operating the Memcom unit.
Detailed options for configuring the Memcom unit's functions.
Solutions for common problems encountered with the Memcom unit.
Accessing the legacy programming menu for the Memcom unit.
Identification and description of the Memcom unit's parts.
Wiring diagram for a dual illuminated alarm push button.
Default programming settings tailored for Australian and NZ lift industries.
Steps to enter the initial programming mode upon unit power-up.
Overview of controls used for navigating the quick start menu.
Programming up to four alarm telephone numbers for the Memcom unit.
Access to various configuration settings like Volume, Accessories, and System Config.
Configuration for detecting faults from third-party lift monitoring devices.
Tracking lift operations and triggering alerts based on intervals.
Setting delays for alarm button presses and call establishment.
Configuration of location and reassurance messages for alarm calls.
Setting the current time and date for the Memcom unit.
Configuration for system-wide settings and operation modes.
Advanced system configuration options for specific functionalities.
Configuration of hardware monitoring for power, phone line, and GSM status.
Configuration of advanced features like Passcode, Network ID, and Language.
Setting the operating modes for the unit's relay contact.
Forcing the relay into a specific state regardless of the operating mode.
Hardware configuration for connecting external accessories.
Setting the Global Mean Time offset for accurate timekeeping.
Configuration for Dual Tone Multi-Frequency receiver.
Common problems and solutions related to the telephone line connection.
Troubleshooting issues with the GSM unit not working or being recognized.
Solutions for wiring problems with alarm pushes and sound quality.
Information on powering down, battery charging, and power supply.
Troubleshooting sound quality and functionality of COP accessories.
Specifications and replacement guide for the unit's battery.
General