Need help?Do you have a question about the AVIRE Memcom+ and is the answer not in the manual?
General| Brand | AVIRE |
|---|---|
| Model | Memcom+ |
| Category | Emergency Phone |
| Language | English |
Details installation for the Top Of Car version of the Memcom unit.
Details installation for the Car Operating Panel version of the Memcom unit.
Explains how to integrate the Memcom unit into existing lift systems or monitoring solutions.
Procedure for selecting the initial language for the Memcom unit upon first power-up.
Step-by-step guide to configuring essential settings via the Quick Start menu.
Information on the Avire Hub cloud platform for remote monitoring and management.
Explains navigation using arrow keys and the structure of the unit's menu system.
Describes how the unit indicates faults and the procedure for ending an alarm state.
Refers to the initial setup menu for quick configuration of the unit.
Details how to program alarm and technical telephone numbers for the unit.
Configuration options for audio inputs/outputs and phone line types.
Covers ID Code, Volume, and System Configuration parameters.
Advanced configuration settings like Auto Location, Avoid Silence, and Quick Dial.
Details the system elements checked during the unit's self-test and test calls.
Configuration of technical inputs for fault detection from third-party devices.
Setting up operation counts for triggering technical alerts or monitoring lift usage.
Adjusting time delays for various call initiation and hang-up events.
Configuration of location, reassurance, and guidance messages for call centre interaction.
Setting the current time and date for accurate event logging.
Configuration of passcode, network ID, PBX frequency, and language settings.
Defining the behavior of relay contacts for siren, door release, and fault conditions.
Options to force primary relay contacts open or closed regardless of operation mode.
Solutions for common problems like "No Dial Tone" and unrecognized numbers.
Troubleshooting steps for GSM unit recognition and functionality issues.
Guidance on resolving issues with alarm pushes, wiring, and sound quality.
Resolving problems related to unit power, battery charging, and display.
Diagnosing and fixing sound quality and display issues with COP accessories.
Step-by-step instructions for safely replacing the unit's internal battery.
Overview of the legacy programming menu, access methods, and command codes.
Details programming options for various Memcom alarm and software call types.
To Next Page
