2.1 Unlocking Your Scanner
To protect the scanning unit from damage during
transportation, a lock switch is designed at the back of the
scanner to keep the scanning unit from moving. Unlock the
scanner by moving the lock switch to the “Unlock” position.
(Refer to the Lock/Unlock figure.)
Lock position Unlock position
Note: If the scanning unit is not located at the front of the
scanner before transporting the scanner, be sure to do the
follows:
1. Turn on the scanner.
2. The scanning unit should move to the front of the
scanner.
3. Press the lock switch down to the “Lock position”.
4. The scanner is now ready to transport.
To Next Page
