6.3 Replacing the ADF detachable pad module
After scanning approximately 50,000 pages through the ADF,
the pad spring may be worn out and you may experience
problems with document feeding. In this case, it is highly
recommended to replace the pad module with a new one.
For ordering the pad module, please consult your nearest
dealer and follow the procedure in below to replace it.
Removing Procedure
1. Open the ADF front cover by pressing the button.
2. Remove the ADF detachable pad module by pulling out
the upper part of the pad clamp as shown in the figure
below.
Remove the pad module
ADF Pad
To Next Page
Loading...
