After you’ve followed the steps above, your device
should be ready to help save a life!
Step 1: Remove the Avive AED™ from the packaging.
Step 2: Press the Power Button . The Avive AED will run some
initialization self-checks to make sure it is ready to go. You will be
prompted to press the Child Button and Español Button to
ensure they are functioning properly.
Once initialization is complete, the Avive AED will prompt you to press
the Power Button to power off the AED.
Step 3: Connect the device to the Avive™ USB Power Adapter with the
Avive USB Charging Cable to charge the battery. [See Section 5.3]
SECTION 1
4
SECTION 1 INITIAL DEVICE SETUP
Initial Device Setup
To Next Page
Loading...
