This term indicates important information or instructions. Failure to follow these
instructions will significantly prevent or hinder the successful execution of the actions
described in this documentation.
2.2 General Safety Instructions
➢ When using the product, a professional must ensure that the test object or test
system cannot enter operating modes that could cause injuries or damage.
➢ Test and assembly work must only be carried out by trained personnel.
➢ Never use devices with defective cable guides which are clearly damaged or which
show damage due to falls. Such devices must first be checked by qualified service
personnel.
➢ Read the operations manual completely and carefully.
➢ If the device falls or is damaged, have it checked by a qualified service technician
before resuming operation.
➢ Make sure that cables are not stretched or kinked or come into contact with sharp
edges.
➢ Do not let the device come into contact with hot or moving parts.
➢ Always disconnect the device from the connections when not in use.
➢ Pull the plug, not the cable, to remove the plug from the USB port.
➢ Let the device cool down completely before putting it away.
➢ To reduce the risk of fire, do not operate the device near open vessels with
flammable liquids (petrol).
➢ Ensure adequate ventilation when working on combustion engines.
➢ Keep hair, loose clothing, fingers and all body parts away from moving parts.
➢ Operate the device only as described in this manual.
To Next Page
Loading...
Need help?
General
