FRITZ!Box 3490 30
Push Services: Notification Services of the FRITZ!Box
Saving Energy at the LAN Ports
For energy-efficient use of your gigabit LAN ports you can
specify for each individual LAN port whether it should always
operate with full power (power mode) or with reduced energy
consumption (green mode). With green mode you can reduce
the power consumption of the FRITZ!Box to the level neces-
sary for your applications.
The LAN ports can be configured in the advanced view of the
FRITZ!Box user interface; see page 27. In the “Home Network
/ Network / Network Settings” menu you can select from
among the following operating modes in the “LAN Settings”
area:
8.3 Push Services: Notification Services of the FRITZ!Box
Push services are notification services that inform you about
the activities of your FRITZ!Box and assist you in saving your
passwords and FRITZ!Box settings. With the push services
you can have e-mail sent to you at regular intervals informing
you about the latest connections, usage and configuration of
your FRITZ!Box.
Various push services are available in the user interface un-
der “System / Push Service”. There you can select the push
service interesting for you and specify which events in the
FRITZ!Box you would like to be informed about, how often
these e-mails should be sent, and to which e-mail address.
operating mode Functionality and Power Consumption
Power Mode In this setting LAN connections are estab-
lished with a maximum throughput of
1Gbit/s.
Higher power consumption than in green
mode if the LAN port is used.
Green Mode As needed, the FRITZ!Box establishes LAN
connections with a data throughput rate of
100 Mbit/s.
Lower power consumption than with the
“Power Mode” setting.
To Next Page
Loading...
Need help?
General
