AVM Fritz!Box 3490 User Manual

Access from the Internet via HTTPS, FTP and FTPS
FRITZ!Box 3490 73
Every time the IP address changes, the FRITZ!Box transmits
the new IP address to the dynamic DNS provider in the form of
an update request. Then the domain name is assigned to the
current IP address by the dynamic DNS provider.
Setting Up Dynamic DNS in the FRITZ!Box
1. Open the FRITZ!Box user interface; see page 25.
2. Enable the advanced view.
3. Select the “Internet / Permit Access” menu.
4. Select the “Dynamic DNS” page and set up dynamic
DNS. See the Help available in the FRITZ!Box user inter-
face for more information.
12.4 Access from the Internet via HTTPS, FTP and FTPS
Over the Internet it is possible to access the user interface of
the FRITZ!Box. With a laptop, smartphone or tablet PC you can
configure settings in the FRITZ!Box user interface.
Requirements for Access over the Internet
• Access to the user interface: Every user who would like
to access the FRITZ!Box externally from the Internet re-
quires a FRITZ!Box user account which is authorized for
access from the Internet.
• Access to storage: Every user who would like to access
the storage of the FRITZ!Box externally from the Internet
requires a FRITZ!Box user account with the right to ac-
cess the contents on the storage media from the Inter-
net.
• The protocols for the desired access must be enabled in
the FRITZ!Box.
HTTPS, FTP and FTPS
The protocols HTTPS, FTP and FTPS are used for access over
the Internet.

AVM Fritz!Box 3490 Specifications

General

Brand	AVM
Model	Fritz!Box 3490
Category	Network Router
Language	English