Always Prepared with ‘Remote Wake Up’
FRITZ!Card PCI – 5 How FRITZ!Card PCI Works 41
For more information on ACPI, see Windows Help, or the doc-
umentation on the FRITZ!Card PCI CD in the SOFTWARE\INFO
folder or the manuals for your computer and motherboard.
Always Prepared with ‘Remote Wake Up’
Please note the following to keep FRITZ!Card PCI and FRITZ!
ready to receive at all times in standby operation.
z Deactivate the “Hibernation” option. The “Remote
Wake Up over ISDN” command is not available when
the system is hibernating.
z For the computer to be able to accept incoming calls an
faxes, a relevant ISDN application must be started, for
instance FRITZ!fax.
z If you operate FRITZ!Card PCI at a PBX with an internal
S
0
bus, it may not make sense to use standby. Some
PBX systems constantly interrupt standby operation
with internal signals. In such a case, connect your
FRITZ!Card PCI directly to the S
0
bus.
The computer will be “woken up” when FRITZ!Card PCI re-
ceives information about an incoming call during standby
(hence the name “Remote Wake Up”). The program checks
the service indicator and phone number of the incoming call;
if a suitable program is active, the call will be accepted.
Depending on the power options set, the computer may re-
turn to standby after checking the call parameters.
To Next Page
Loading...
Need help?
General