CONNECTION
5
Step2: Get a compatible hard disk. With the PCB side facing down, align the hard disk with the hard disk power &
sata port, and insert the hard disk.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure
the device works properly.
Step3: Fasten the hard disk to the bracket by securing the screws on the bracket.
Note: You may find screws in the sales package.
h
a
r
d
d
i
s
k
Step4: Replace the top cover and fasten the screws you loosened in Step1.
To Next Page
Loading...
