EXIT
1) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
2) MULTI-SCREEN DURATION (For selected models only)
Select the dwell duration time for different channel display modes in second (03 / 05 / 10 / 15).
Note: The display modes available depend on the model you have and how many channels of it.
3) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” when covert recording is activated in “CAMERA”.
4) HDD DISPLAY MODE
Select “REMAINING SIZE” to show the remaining HDD capacity for recording in GB, or “REMAINING TIME”
to show the remaining recording time.
5) BRIGHTNESS / CONTRAST / SATURATION
Click the current value to manually adjust the brightness/contrast/saturation/ of the screen.
6) DISPLAY OUTPUT
Select the display resolution you want. There are four options as follows:
AUTO (default) 1920 x 1080 1280 x 720 1024 x 768
Note: To have the best image quality on your monitor, make sure (1) the selected DVR output
resolution is supported by your monitor, and (2) the output settings on both the LCD monitor and
DVR are consistent.
If the image is not positioned or scaled properly, please go to your monitor’s menu for
adjustment. For details, please refer to the user manual of your monitor.
7) COVERT UNLOCK IN SUPERVISOR MODE
Enable this function to allow the supervisor user to see live view even when the channel is set “COV.” to “ON”
in “ADVANCED CONFIG” “CAMERA”.
To Next Page
Loading...
