NETWORK CONFIGURATIONS
11
Step4: (PPPOE & DHCP Only) Go to “DDNS”, and select “eagleeyes” in “SYSTEM NAME”.
Note down the whole address under “CURRENT HOST ADDRESS”, such as
MAC000E5318B3F0@ddns.dvrtw.com.tw. This will be the address used to access your NVR remotely.
ADVANCED CONFIG
CONNECTION
WAN
CAMERA
DDNS ON
DETECTION
SYSTEM NAME eagleeyes
ALERT
HOST NAME MAC000E5318B3F0
NETWORK
E-MAIL EMPTY
DISPLAY
RECORD
NOTIFY
CURRENT HOST ADDRESS
EXIT
MAC000E5318B3F0.ddns.dvrtw.com.tw
Then, select “EXIT” to return to the live view and finish network configurations.
Check your connection
Step1: Open your web browser, e.g. Internet Explorer.
Step2: Enter the IP address (STATIC) or host address (PPPOE / DHCP), and the port number in the URL
address box of the web browser, and see if you can access the login page of the camera successfully.
The format is “http://ipaddress:portnum” or “http://hostaddress:portnum”.
To Next Page
Loading...
